|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Primeberg Fino Brown Facade Thermal Panel
Reliable solution for a stylish and warmer facade. The thermal panel combines EPS-100 insulation with Golden Tile porcelain stoneware cladding in a matte brown shade with a textured surface. The rich brown color adds depth and solidity to the building, harmoniously matching the roof, fencing, and natural surroundings. The texture creates a brickwork effect and emphasizes the owner’s status. The panel simultaneously insulates and enhances the facade’s appearance, making it ideal for cottages, townhouses, as well as commercial buildings — offices, shops, and restaurants.
Suitable for the following types of buildings
- Private houses and cottages — elegant appearance and insulation.
- Summer houses and country homes — comfort all year round.
- Apartment buildings — reduced heating costs and a modern look.
- Commercial properties (shops, offices, restaurants) — attractive facade and utility savings.
- Industrial buildings — efficient insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern manufacturing with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decoration in one material.
- Heat retention in winter and pleasant coolness in summer.
Technical Specifications
| Parameter | Value |
|---|---|
| Tile color | Brown |
| Surface finish | Matte |
| Tile type | Porcelain stoneware |
| Tile manufacturer | Golden Tile |
| Panel size (W×L) | 1040×560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| EPS grade | EPS-100 (Density – 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area per panel | 0.582 m² |
| Panels per 1 m² | 2 pcs |
EPS thickness: which one to choose?
Not sure which thickness to choose? Here is a quick guide based on building type and climate. If in doubt — we will help you select the optimal option for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Provides a slight effect and is mainly used as a corrective or decorative solution rather than full insulation. |
| 80 mm | Entry-level thermal insulation for relatively warm walls or regions with mild climates. Used in renovations across Europe but does not meet modern energy-efficiency requirements for new buildings. |
| 100 mm | Basic option for small buildings, summer houses, or seasonal homes. Provides noticeable heat-loss reduction but is considered the minimum acceptable level in colder European regions. |
| 120 mm | The most balanced solution for most residential houses in temperate and cold climates. Ensures a comfortable indoor microclimate and real savings on heating without excessive material use. |
| 150 mm | Complies with building regulations for thermal insulation of multi-apartment residential buildings. A high-quality solution for energy-efficient homes with permanent occupancy. Significantly reduces heating costs and helps approach low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). Used where minimal heat loss is the priority rather than upfront savings, and complies with European thermal insulation standards for residential buildings. |
The thicker the EPS, the better the thermal insulation. We will help you choose the optimal thickness for your home.
Installation and Storage Recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and level. Eliminate all irregularities and defects if necessary.
- Layout: Carefully mark the panel placement, starting from the bottom row.
- Fixation: Panels are attached to the wall using special anchors and polyurethane adhesive foam. Follow the manufacturer’s recommendations regarding the number and placement of fixings.
- Joint grouting: After installation, joints between tiles must be filled with special grout to ensure additional sealing and an aesthetic appearance.
Storage:
- Store thermal panels in a dry, well-ventilated area protected from direct sunlight and moisture.
- Panels should be stored horizontally on a flat surface to prevent deformation.
Want a beautiful and warm facade?
We will select the thickness, color, and configuration for your home, create a 3D preview, and provide an accurate calculation.
Leave a request on our website or call: +380 (66) 373 13 31