|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Primeberg Fino Light Beige Facade Thermal Panel
Universal solution for a cozy and elegant facade. The thermal panel combines EPS-100 insulation with Golden Tile porcelain stoneware cladding in a matte light beige shade with a textured surface. The warm light beige color creates a sense of comfort and harmoniously fits both modern and classic architectural styles. This surface adds lightness to the building and visually makes it warmer and more inviting. The panel not only reliably retains heat but also creates a stylish appearance for private houses, cottages, townhouses, and commercial properties — from cafés to small hotels.
Suitable for the following types of buildings
- Private houses and cottages — elegant appearance and effective insulation.
- Summer houses and country homes — comfort all year round.
- Apartment buildings — reduced heating costs and a modern look.
- Commercial properties (shops, offices, restaurants) — attractive facade and utility savings.
- Industrial buildings — efficient insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern manufacturing with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decoration in one material.
- Heat retention in winter and pleasant coolness in summer.
Technical Specifications
| Parameter | Value |
|---|---|
| Tile color | Light Beige |
| Surface finish | Matte |
| Tile type | Porcelain stoneware |
| Tile manufacturer | Golden Tile |
| Panel size (W×L) | 1040×560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| EPS grade | EPS-100 (Density – 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area per panel | 0.582 m² |
| Panels per 1 m² | 2 pcs |
EPS thickness: which one to choose?
Not sure which thickness to choose? Below is a quick guide based on building type and climate. If unsure — we will help you select the optimal solution for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Provides a slight effect and is mainly used as a corrective or decorative solution rather than full insulation. |
| 80 mm | Entry-level thermal insulation for relatively warm walls or regions with mild climates. Used in renovations across Europe but does not meet modern energy-efficiency requirements for new buildings. |
| 100 mm | Basic option for small buildings, summer houses, or seasonal homes. Provides noticeable heat-loss reduction but is considered the minimum acceptable level in colder European regions. |
| 120 mm | The most balanced solution for most residential houses in temperate and cold climates. Ensures a comfortable indoor microclimate and real heating savings without excessive material use. |
| 150 mm | Complies with building regulations for thermal insulation of multi-apartment residential buildings. A high-quality solution for energy-efficient homes with permanent occupancy. Significantly reduces heating costs and helps approach low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). Used where minimal heat loss is the priority rather than upfront savings and complies with European thermal insulation standards. |
The thicker the EPS, the better the thermal insulation. We will help you choose the optimal thickness for your home.
Installation and Storage Recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and level. Remove any irregularities and defects if necessary.
- Layout: Carefully mark the panel placement starting from the bottom row.
- Fixation: Panels are attached using special anchors and polyurethane adhesive foam. Follow the manufacturer’s recommendations regarding the number and placement of fixings.
- Joint grouting: After installation, joints between tiles must be filled with special grout to ensure additional sealing and an aesthetic appearance.
Storage:
- Store thermal panels in a dry, well-ventilated area protected from direct sunlight and moisture.
- Panels should be stored horizontally on a flat surface to prevent deformation.
Want a beautiful and warm facade?
We will select the thickness, color, and configuration for your home, create a 3D preview, and provide an accurate cost calculation.
Leave a request on our website or call: +380 (66) 373 13 31