|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg London Anthracite
A facade that emphasizes status. The thermal panel combines EPS-100 insulation with Golden Tile porcelain stoneware cladding in a matte anthracite shade with a pronounced textured surface. The deep dark-grey color creates an elegant and restrained look associated with premium quality and contemporary style. Anthracite perfectly complements glass, metal, and wooden elements, making the building visually solid and expressive. The panel not only retains heat and protects the facade but also shapes a modern design for private cottages, townhouses, and commercial properties — from offices to restaurants.
Suitable for
- Private houses and cottages — elegant appearance and effective insulation.
- Summer houses and country homes — comfort in any season.
- Apartment buildings — reduced heating costs and a modern look.
- Commercial properties (shops, offices, restaurants) — attractive facade and savings on utility costs.
- Industrial buildings — efficient insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern manufacturing with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decoration in one material.
- Heat retention in winter and pleasant coolness in summer.
Technical Specifications
| Parameter | Value |
|---|---|
| Tile color | Anthracite |
| Texture | Matte |
| Tile type | Porcelain stoneware |
| Tile manufacturer | Golden Tile |
| Panel size (W×L) | 1040×560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| EPS class | EPS-100 (Density – 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
EPS thickness: which one to choose?
Not sure which thickness to choose? Here is a short guide depending on the building type and climate. If you are unsure — we will help you select the optimal solution for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Provides a limited effect and is mainly used as a corrective or decorative solution rather than full insulation. |
| 80 mm | Entry-level thermal insulation for relatively warm walls or regions with mild climates. In Europe, it is used for renovations but does not meet modern energy efficiency standards for new residential buildings. |
| 100 mm | Basic option for smaller buildings, cottages, or seasonal homes. Provides noticeable reduction of heat loss, but in colder European regions it is considered the minimum acceptable thickness. |
| 120 mm | The most balanced solution for most suburban residential buildings in moderate and cold climates. Ensures a comfortable indoor microclimate and real heating cost savings without excessive material use. |
| 150 mm | Complies with building standards for thermal insulation of multi-apartment residential buildings. A high-quality solution for energy-efficient homes with permanent residence. Significantly reduces heating costs and brings the building closer to low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). Used where minimal heat loss is the priority and complies with European thermal insulation standards. |
The thicker the EPS layer, the better the thermal insulation. We will help you select the optimal thickness for your home.
Installation and Storage Recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and level. Remove all irregularities and defects if necessary.
- Layout: Carefully mark the panel placement, starting from the bottom row.
- Fixing: Panels are attached to the wall using special facade dowels and polyurethane adhesive foam. Follow the manufacturer’s recommendations regarding the number and placement of fixings.
- Grouting: After installation, the joints between the tiles must be filled with special grout to ensure additional sealing and an aesthetic appearance.
Storage:
- Store thermal panels in a dry, well-ventilated area protected from direct sunlight and moisture.
- Panels should be stored horizontally on a flat surface to prevent deformation.
Want a beautiful and warm facade?
We will select the right thickness, color, and configuration for your home, provide a 3D preview, and prepare an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31