|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg Seven Tones Beige
Cozy comfort you notice at first glance. The thermal panel combines EPS-100 insulation with Golden Tile porcelain stoneware cladding in a matte beige shade with a distinctive texture. Light beige tones create a warm atmosphere, make the facade visually brighter, and harmonize perfectly with natural-colored roofs, wooden elements, and stone. This solution is ideal for private cottages and townhouses, as well as for commercial premises where aesthetics and trust matter.
Suitable for
- Private houses and cottages — elegant appearance and effective insulation.
- Country and holiday homes — comfort all year round.
- Apartment buildings — reduced heating costs and modern design.
- Commercial properties (shops, offices, restaurants) — attractive facade and energy savings.
- Industrial buildings — efficient insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decoration in one material.
- Keeps warmth in winter and coolness in summer.
Technical specifications
| Parameter | Value |
|---|---|
| Tile color | Beige |
| Texture | Matte |
| Tile type | Porcelain stoneware |
| Tile manufacturer | Golden Tile |
| Panel size (W×L) | 1040×560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| EPS class | EPS-100 (Density – 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
EPS thickness – which one to choose?
Not sure which thickness to choose? Here is a short guide based on building type and climate. If in doubt, we will help you select the optimal solution for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Provides limited effect and is mainly used as a corrective or decorative solution. |
| 80 mm | Entry-level thermal insulation for relatively warm walls or regions with a mild climate. Used in renovations in Europe but does not meet modern energy efficiency standards for new buildings. |
| 100 mm | Basic option for smaller buildings, cottages, or seasonally used homes. Provides noticeable reduction of heat loss, but in colder regions is considered the minimum acceptable standard. |
| 120 mm | The most balanced solution for most residential houses in moderate and cold climates. Ensures comfortable indoor conditions and real heating cost savings without excessive material use. |
| 150 mm | Meets building standards for thermal insulation of multi-family residential buildings. A quality solution for energy-efficient homes with permanent residence. Significantly reduces heating costs and moves the building closer to low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or nearly zero-energy buildings (NZEB). Used where minimal heat loss is a priority and complies with European insulation standards. |
The thicker the EPS layer, the better the thermal insulation. We will help you choose the optimal thickness for your home.
Installation and storage recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and even. Remove any irregularities and defects if necessary.
- Layout marking: Carefully mark the panel placement, starting from the bottom row.
- Fixing: Panels are attached to the wall using special facade anchors and polyurethane adhesive foam. Follow the manufacturer’s recommendations regarding the number and placement of fixings.
- Grouting: After installation, joints between tiles must be filled with special grout to ensure additional sealing and an aesthetic finish.
Storage:
- Store thermal panels in a dry, well-ventilated area protected from direct sunlight and moisture.
- Panels should be stored horizontally on a flat surface to prevent deformation.
Want a beautiful and warm facade?
We will select the right thickness, color, and configuration for your home, prepare a 3D preview, and provide an accurate calculation.
Submit a request on the website or call: +380 (66) 373 13 31