|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Primeberg Argilla Wallnut Facade Thermal Panel
Argilla Wallnut — a rich walnut shade with a warm character.
The Wallnut color combines dark brown and caramel tones, creating a deep natural facade appearance. The matte surface adds visual softness and a noble aesthetic to the material.
Perfectly suited for classic and countryside houses, giving the architecture a sense of comfort, stability, and reliability.
Suitable building types
- Private houses and cottages — elegant appearance and thermal insulation.
- Summer houses and country homes — comfort in every season.
- Multi-apartment buildings — reduced heating costs and modern exterior design.
- Commercial properties (shops, offices, restaurants) — attractive facade and utility savings.
- Industrial buildings — efficient insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decoration in one material.
- Heat retention in winter and coolness in summer.
Technical specifications
| Parameter | Value |
|---|---|
| Tile color | Brown |
| Texture | Matte |
| Tile type | Clinker gres |
| Tile manufacturer | Cerrad |
| Panel size (W × L) | 1040 × 560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| Polystyrene class | EPS-100 (Density — 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
Polystyrene thickness: which one to choose?
Not sure which thickness to choose? Below is a quick guide depending on building type and climate conditions. If in doubt, we will help you select the optimal solution for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Used mainly as a corrective or decorative solution. |
| 80 mm | Entry-level thermal insulation for relatively warm walls or regions with mild climates. Commonly used for renovations in Europe but does not meet modern energy-efficiency standards for new buildings. |
| 100 mm | Basic option for small buildings, summer houses, or seasonal homes. Provides noticeable reduction of heat loss. |
| 120 mm | The most balanced solution for most residential houses in moderate and cold climates, ensuring comfort and real heating savings. |
| 150 mm | Meets thermal insulation requirements for multi-apartment residential buildings. A high-quality solution for energy-efficient homes with permanent residence. |
| 200 mm | Maximum insulation level for northern regions or nearly zero-energy buildings (NZEB), compliant with European thermal insulation standards. |
The thicker the polystyrene — the better the thermal insulation. We will help you choose the optimal thickness for your home.
Installation and storage recommendations
Installation:
- Surface preparation: The facade must be clean, dry, and level before installation.
- Marking: Carefully mark panel placement starting from the bottom row.
- Fixing: Panels are fixed to the wall using special anchors and polyurethane adhesive foam.
- Joint grouting: After installation, joints between tiles must be filled with special grout for sealing and aesthetics.
Storage:
- Store thermal panels in a dry, ventilated area protected from direct sunlight and moisture.
- Panels should be stored horizontally on a flat surface to prevent deformation.
Want a beautiful and warm facade?
We will select the thickness, color, and configuration for your home, provide a 3D preview, and prepare an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31