|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg Foggia Gris
Foggia Gris — modern classic in shades of grey.
The thermal panel combines EPS-100 insulation with clinker tiles from Cerrad in the Gris shade with a matte surface. The grey color adds restraint and elegance to the facade, emphasizes the geometry of the building, and creates a sense of reliability and stability.
This shade is universal and harmoniously combines with white, black, and wooden elements. It is suitable for both modern minimalist solutions and classic architectural styles. Foggia Gris looks equally impressive on private houses, cottages, and commercial buildings, adding refined character and visual balance.
Suitable for the following types of buildings
- Private houses and cottages — elegant appearance and thermal insulation.
- Summer houses and country homes — comfort throughout the year.
- Apartment buildings — reduced heating costs and modern facade design.
- Commercial properties (shops, offices, restaurants) — attractive facade and utility savings.
- Industrial buildings — effective insulation and aesthetic appearance.
Why choose Primeberg thermal panels?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decorative finishing in one material.
- Heat retention in winter and cool indoor climate in summer.
Technical specifications
| Parameter | Value |
|---|---|
| Tile color | Grey |
| Surface texture | Matte |
| Tile type | Clinker gres |
| Tile manufacturer | Cerrad |
| Panel size (Width × Length) | 1040 × 560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| Polystyrene class | EPS-100 (Density — 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | From 5 to 15 kg depending on thickness |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
Polystyrene thickness — which one to choose?
Not sure which thickness to select? Below is a brief guide depending on building type and climate conditions. If you are unsure, we will help you choose the optimal solution for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Mainly used as a corrective or decorative solution. |
| 80 mm | Initial level of insulation for relatively warm walls or regions with mild climate. |
| 100 mm | Basic option for small buildings, cottages, or seasonal residences. |
| 120 mm | The most balanced solution for most residential houses in moderate and cold climates. |
| 150 mm | Meets thermal insulation standards for residential buildings and significantly reduces heat loss. |
| 200 mm | Maximum insulation level for northern regions or nearly zero-energy buildings (NZEB). |
The thicker the polystyrene, the better the thermal insulation. We will help you select the optimal thickness for your building.
Installation and storage recommendations
Installation:
- Surface preparation: the facade must be clean, dry, and even before installation.
- Marking: carefully mark panel placement starting from the bottom row.
- Fixing: panels are fixed using special facade anchors and polyurethane adhesive foam according to manufacturer recommendations.
- Joint grouting: after installation, joints between tiles must be filled with special grout for sealing and aesthetic appearance.
Storage:
- Store thermal panels in a dry, ventilated area protected from moisture and direct sunlight.
- Panels must be stored horizontally on a flat surface to prevent deformation.
Do you want a beautiful and warm facade?
We will select the thickness, color, and configuration for your building, create a 3D preview, and prepare an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31