|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg Foggia Nero
Nero — style and strength in every facade.
The thermal panel combines EPS-100 insulation material with clinker tile from Cerrad in the Nero shade with a matte surface. The deep black color gives the building strong visual expression, emphasizes a modern architectural character, and creates a premium appearance.
This shade is chosen by those who appreciate strict design and want to highlight the architecture of their house or commercial building. Nero harmoniously combines with white, gray, and wooden elements, creating contrast and a modern dynamic facade appearance.
Suitable building types
- Private houses and cottages — elegant appearance and thermal insulation.
- Summer houses and country homes — comfort throughout the year.
- Multi-apartment residential buildings — reduction of heating costs and modern exterior appearance.
- Commercial facilities (shops, offices, restaurants) — attractive facade and savings on utility expenses.
- Industrial buildings — effective insulation and aesthetic appearance.
Why choose thermal panels from Primeberg?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decorative finishing in one material.
- Heat retention in winter and coolness preservation in summer.
Technical specifications
| Parameter | Value |
|---|---|
| Tile color | Black |
| Texture | Matte |
| Tile type | Clinker gres |
| Tile manufacturer | Cerrad |
| Panel size (Width × Length) | 1040 × 560 millimeters |
| Thermal conductivity (lambda) | 0.037 watts per meter kelvin |
| Polystyrene class | EPS-100 (Density — 18 kilograms per cubic meter) |
| Water absorption | 2–4 percent |
| Weight | From 5 to 15 kilograms depending on thickness |
| Area of one panel | 0.582 square meters |
| Quantity per 1 square meter | 2 pieces |
Polystyrene thickness: which one to choose?
Not sure which thickness to choose? Below is a short recommendation depending on the building type and climate conditions. If you have doubts, we will help you select the optimal solution specifically for your project.
| Thickness | Recommendation |
|---|---|
| 50 millimeters | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Provides a small effect and is mainly used as a corrective or decorative solution rather than full thermal insulation. |
| 80 millimeters | Initial level of thermal insulation for relatively warm walls or regions with a mild climate. Used in Europe for renovation projects but does not meet modern energy efficiency requirements for new residential construction. |
| 100 millimeters | Basic option for small buildings, summer houses, or seasonal residences. Provides noticeable reduction of heat loss, although in colder European regions it is already considered the minimum acceptable level. |
| 120 millimeters | The most balanced solution for the majority of suburban residential houses in moderate and cold climates. |
| 150 millimeters | Complies with national building standards for thermal insulation of multi-apartment residential buildings and significantly reduces heating costs. |
| 200 millimeters | Maximum insulation level for northern regions or buildings with nearly zero energy consumption and compliance with European thermal insulation standards. |
The thicker the polystyrene, the better the thermal insulation performance. We will help you select the optimal thickness for your building.
Installation and storage recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and even. Remove all irregularities and defects if necessary.
- Marking: Carefully mark the placement of panels starting from the bottom row.
- Fixing: Panels are fixed to the wall using special dowels and polyurethane adhesive foam according to manufacturer recommendations.
- Joint grouting: After installation, joints between tiles must be filled with a special grout to ensure sealing and aesthetic appearance.
Storage:
- Store thermal panels in a dry and ventilated room protected from direct sunlight and moisture.
- Panels must be stored horizontally on a flat surface to prevent deformation.
Do you want a beautiful and warm facade?
We will select the thickness, color, and configuration for your building, provide a three-dimensional preview, and perform an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31