|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg Katerynoslav Sand Dune
A facade in warm natural tones. The thermal panel combines EPS-100 insulation with hand-molded facing tiles from Katerynoslav in the Sand Dune shade with a relief texture. The golden-sandy palette with light brown undertones creates the effect of natural stone and adds a sense of warmth and harmony to the facade. This design highlights both modern and classical architecture and pairs perfectly with wood, glass, and dark-colored roofs. The facade in the “Sand Dune” shade looks cozy and at the same time prestigious, becoming a real decoration of a house or commercial facility.
Suitable for which types of buildings
- Private houses and cottages — elegant appearance and insulation.
- Summer houses and suburban homes — comfort in any season.
- Apartment buildings — reduction of heating costs and a modern look.
- Commercial facilities (shops, offices, restaurants) — an attractive facade and savings on utility services.
- Industrial buildings — effective insulation and aesthetics.
Why choose thermal panels from Primeberg?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decor in one material.
- Heat retention in winter and coolness in summer.
Technical Specifications
| Parameter | Value |
|---|---|
| Tile color | Brick\Terracotta |
| Texture | Relief |
| Tile type | Hand-molded |
| Tile manufacturer | Katerynoslav |
| Panel size (W×L) | 1040×560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| Foam class | EPS-100 (Density - 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs. |
Foam thickness: which one to choose?
Not sure which thickness to choose? Here is a short recommendation based on the type of building and climate. If in doubt — we will suggest the optimal option specifically for your facility.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated houses or facades where it is not possible to increase thickness. Provides a small effect and is used rather as a corrective or decorative solution rather than full-fledged insulation. |
| 80 mm | Initial level of thermal insulation for relatively warm walls or regions with a mild climate. In Europe, it is used for renovations but does not meet modern energy efficiency requirements for new housing. |
| 100 mm | Basic option for small buildings, summer houses, or houses with seasonal residence. Provides a noticeable reduction in heat loss but is already considered minimally acceptable in colder regions of Europe. |
| 120 mm | The most balanced solution for most suburban residential buildings in moderate and cold climates. Ensures a comfortable microclimate and real savings on heating without excessive material consumption. |
| 150 mm | Meets the standards for thermal insulation of apartment buildings. A high-quality solution for energy-efficient and suburban homes with permanent residence. Allows significantly reducing heating costs and approaching low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). Used where minimal heat loss is a priority rather than initial savings and meets European standards for thermal insulation of apartment buildings. |
The thicker the foam — the better the thermal insulation. We will help you choose the optimal thickness for your home.
Installation and storage recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and even. If necessary, remove all irregularities and defects.
- Marking: Carefully mark the placement of the panels, starting from the bottom row.
- Fixing: The panels are attached to the wall using special dowels and polyurethane adhesive foam. It is important to follow the manufacturer's recommendations regarding the number and placement of fasteners.
- Joint grouting: After installation of the panels, the joints between the tiles must be filled with a special grout, which will ensure additional sealing and an aesthetic appearance.
Storage:
- Store thermal panels in a dry, ventilated room protected from direct sunlight and moisture.
- The panels should be stored horizontally on a flat surface to avoid deformation.
Do you want a beautiful and warm facade?
We will select the thickness, color, and configuration for your home, provide a preliminary 3D preview, and perform an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31