|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg Katerynoslav Tavrichna
A facade with the warmth of tradition and authentic character. The thermal panel combines EPS-100 insulation with hand-molded brick cladding in the Tavrichna shade featuring a textured surface. The rich red-terracotta color with natural tonal transitions creates the effect of aged brick, adds coziness, and visually warms the building’s appearance. This facade pairs perfectly with roofs in natural tones as well as wooden and stone elements, forming a harmonious and expressive look. The panel is an ideal solution for cottages, townhouses, and commercial properties where style, reliability, and uniqueness matter.
Suitable for
- Private houses and cottages — elegant appearance and effective insulation.
- Summer and country houses — year-round comfort.
- Apartment buildings — reduced heating costs and a modern look.
- Commercial properties (shops, offices, restaurants) — attractive facade and energy savings.
- Industrial buildings — efficient insulation and aesthetic appeal.
Why choose Primeberg thermal panels?
- Modern production with strict quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decorative finish in one material.
- Keeps warmth in winter and coolness in summer.
Technical Specifications
| Parameter | Value |
|---|---|
| Tile Color | Red / Terracotta |
| Surface | Textured |
| Tile Type | Hand-Molded |
| Tile Manufacturer | Katerynoslav |
| Panel Size (W×L) | 1040×560 mm |
| Thermal Conductivity (λ) | 0.037 W/m·K |
| EPS Class | EPS-100 (Density – 18 kg/m³) |
| Water Absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area of One Panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
EPS Thickness – Which One to Choose?
Not sure which thickness to select? Here’s a quick guide based on building type and climate. If in doubt, we will help you choose the optimal solution for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or where thickness cannot be increased. Mainly a corrective or decorative solution. |
| 80 mm | Basic insulation level for relatively warm walls or regions with a mild climate. |
| 100 mm | Standard option for smaller buildings, summer houses, or seasonal homes. Provides noticeable reduction of heat loss. |
| 120 mm | Balanced solution for most residential houses in moderate and cold climates. |
| 150 mm | Meets building regulations for thermal insulation of multi-apartment residential buildings and energy-efficient homes. |
| 200 mm | Maximum insulation level for northern regions or nearly zero-energy buildings (NZEB), complying with European standards. |
The thicker the EPS layer, the better the insulation performance. We will help you select the optimal thickness for your home.
Installation and Storage Recommendations
Installation:
- Surface preparation: The facade must be clean, dry, and level. Remove any irregularities before installation.
- Layout marking: Carefully mark panel placement starting from the bottom row.
- Fixing: Panels are attached using special facade dowels and polyurethane adhesive foam according to the manufacturer’s recommendations.
- Grouting: After installation, joints between tiles must be filled with suitable grout for sealing and aesthetics.
Storage:
- Store panels in a dry, ventilated area protected from direct sunlight and moisture.
- Keep panels in a horizontal position on a flat surface to prevent deformation.
Want a beautiful and warm facade?
We will select the right thickness, color, and configuration, provide a 3D preview, and prepare an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31