|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Primeberg Klinker Brick Beige Facade Thermopanel
Warm facade with a focus on comfort and aesthetics. The thermopanel combines EPS-100 insulation with Golden Tile porcelain stoneware cladding in a matte beige shade with a textured surface. The natural beige color creates a cozy and harmonious atmosphere, visually warms the building and perfectly matches natural surroundings, light-colored roofs, and decorative elements. The panel provides reliable thermal insulation while forming a stylish facade suitable for private cottages, townhouses, and commercial spaces — from offices to restaurants and cafés.
Suitable for
- Private houses and cottages — elegant appearance and effective insulation.
- Country houses and summer homes — comfort in every season.
- Multi-apartment buildings — reduced heating costs and modern design.
- Commercial properties (shops, offices, restaurants) — attractive facade and utility savings.
- Industrial buildings — efficient insulation and aesthetics.
Why choose Primeberg thermopanels?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decorative finish in one material.
- Heat retention in winter and cool comfort in summer.
Technical Specifications
| Parameter | Value |
|---|---|
| Tile color | Beige |
| Texture | Matte |
| Tile type | Porcelain stoneware |
| Tile manufacturer | Golden Tile |
| Panel size (W×L) | 1040×560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| EPS class | EPS-100 (Density – 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area per panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
EPS Thickness: Which One to Choose?
Not sure which thickness to choose? Here is a quick guide based on building type and climate. If in doubt, we will help you select the optimal option for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Provides a slight effect and is mainly used as a corrective or decorative solution rather than full insulation. |
| 80 mm | Entry-level insulation for relatively warm walls or regions with mild climates. Used in renovations across Europe but does not meet modern energy efficiency standards for new housing. |
| 100 mm | Basic option for small buildings, cottages, or seasonal homes. Provides noticeable heat loss reduction but is considered the minimum acceptable thickness in colder European regions. |
| 120 mm | The most balanced solution for most residential houses in moderate and cold climates. Ensures indoor comfort and real heating cost savings without unnecessary material overuse. |
| 150 mm | Complies with building insulation standards for multi-apartment residential buildings. A high-quality solution for energy-efficient homes with permanent living, helping reduce heating costs and approach low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or nearly zero-energy buildings (NZEB). Used where minimizing heat loss is a priority and meets European insulation standards for residential buildings. |
The thicker the EPS layer, the better the thermal insulation. We will help you choose the optimal thickness for your home.
Installation and Storage Recommendations
Installation:
- Surface preparation: The facade must be clean, dry, and even. Remove any irregularities or defects before installation.
- Marking: Carefully mark the panel layout starting from the bottom row.
- Fixing: Panels are attached using special facade anchors and polyurethane adhesive foam. Follow the manufacturer’s recommendations regarding the number and placement of fixings.
- Joint grouting: After installation, joints between tiles must be filled with special grout to ensure additional sealing and an aesthetic finish.
Storage:
- Store thermopanels in a dry, well-ventilated area protected from direct sunlight and moisture.
- Panels should be stored horizontally on a flat surface to prevent deformation.
Want a beautiful and warm facade?
We will select the optimal thickness, color, and configuration, provide a 3D preview, and prepare an accurate calculation.
Submit a request on the website or call: +380 (66) 373 13 31