|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg Marco Grey
Marco Grey — a calm grey shade with a natural stone effect.
The matte light grey tone with soft tonal transitions creates a restrained and modern facade appearance. The texture resembles natural stone, adding depth and volume to the surface.
An ideal choice for those who value conciseness, practicality, and color harmony in modern architecture.
Suitable for the following types of buildings
- Private houses and cottages — elegant appearance and thermal insulation.
- Summer houses and country houses — comfort throughout the year.
- Multi-apartment residential buildings — reduction of heating costs and a modern exterior appearance.
- Commercial facilities (shops, offices, restaurants) — attractive facade and savings on utility expenses.
- Industrial buildings — effective insulation and aesthetic appearance.
Why is it worth purchasing thermal panels from Primeberg?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Thermal insulation and decoration in one material.
- Heat retention during winter and coolness during summer.
Technical characteristics
| Parameter | Value |
|---|---|
| Tile color | Grey |
| Texture | Matte |
| Tile type | Clinker gres |
| Tile manufacturer | Cerrad |
| Panel size (Width × Length) | 1040 × 560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| Polystyrene class | EPS-100 (Density — 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | From 5 to 15 kg depending on thickness |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pieces |
Polystyrene thickness: which one to choose?
Do you not know which thickness to choose? Below is a short guideline according to the building type and climate conditions. If you have doubts, we will recommend the optimal option specifically for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where it is not possible to increase thickness. Provides a small effect and is mainly used as a corrective or decorative solution rather than full thermal insulation. |
| 80 mm | Initial level of thermal insulation for relatively warm walls or regions with a mild climate. In Europe it is used for renovations but does not meet modern energy efficiency requirements for new residential construction. |
| 100 mm | Basic option for small buildings, summer houses, or buildings with seasonal residence. Provides noticeable reduction of heat loss, but in colder regions of Europe it is already considered the minimum acceptable level. |
| 120 mm | The most balanced solution for most suburban residential buildings in moderate and cold climates. Provides a comfortable indoor microclimate and real savings on heating without excessive material consumption. |
| 150 mm | Complies with building standards regarding thermal insulation of multi-apartment residential buildings. A high-quality solution for energy-efficient and suburban houses with permanent residence. Allows significant reduction of heating expenses and approaching low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). Used where the priority is minimal heat loss rather than initial cost savings and complies with European thermal insulation standards for multi-apartment residential buildings. |
The thicker the polystyrene layer, the better the thermal insulation. We will help you select the optimal thickness for your building.
Installation and storage recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and level. If necessary, eliminate all irregularities and defects.
- Marking: Carefully mark the placement of panels starting from the bottom row.
- Fixing: Panels are fixed to the wall using special facade anchors and polyurethane adhesive foam. It is important to follow the manufacturer recommendations regarding the quantity and positioning of fixings.
- Joint grouting: After installation, the joints between tiles must be filled with a special grout that ensures additional sealing and an aesthetic appearance.
Storage:
- Store thermal panels in a dry and ventilated room protected from direct sunlight and moisture.
- Panels must be stored in a horizontal position on a flat surface in order to prevent deformation.
Do you want a beautiful and warm facade?
We will select the thickness, color, and configuration according to your building, prepare a preliminary three-dimensional visualization, and provide an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31