|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Primeberg Mattone Pietra Beige Facade Thermal Panel
A modern solution for facade finishing and insulation.
The material consists of clinker tiles from the Polish tile manufacturer Paradyz and EPS-100 insulation, providing not only an attractive appearance but also high energy efficiency of the building.
The color Mattone Pietra Beige is a warm beige shade with natural transitions from light sand tones to a soft terracotta hue. The surface is matte and smooth, resembling natural stone and adding comfort together with refined restraint to the facade.
Application: suitable for cladding facades of private houses, plinths, fences, as well as accent interior elements. This thermal panel perfectly combines with wood, plaster, or graphite details, creating a harmonious modern appearance.
Suitable for the following types of buildings
- Private houses and cottages — elegant appearance and insulation.
- Country and holiday houses — comfort throughout the year.
- Multi-apartment buildings — reduction of heating costs and modern appearance.
- Commercial facilities (shops, offices, restaurants) — attractive facade and savings on utility expenses.
- Industrial buildings — effective insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decorative finishing in one material.
- Heat retention in winter and coolness in summer.
Technical characteristics
| Parameter | Value |
|---|---|
| Tile color | Beige / Sand |
| Texture | Matte, Smooth |
| Tile type | Clinker gres |
| Tile manufacturer | Paradyz |
| Panel size (W × L) | 1040 × 560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| Polystyrene class | EPS-100 (Density — 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | From 5 to 15 kg depending on thickness |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
Polystyrene thickness — which one to choose?
Not sure which thickness to choose? Below is a short recommendation depending on the building type and climate conditions. If you are unsure, we will help select the optimal option for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Used mainly as a corrective or decorative solution rather than full insulation. |
| 80 mm | Initial level of thermal insulation for relatively warm walls or regions with mild climate. Used in Europe for renovations but does not meet modern energy efficiency requirements for new buildings. |
| 100 mm | Basic solution for small buildings, cottages, or seasonal houses. Provides noticeable reduction of heat loss. |
| 120 mm | The most balanced solution for most residential houses in moderate and cold climates. Ensures indoor comfort and real heating cost savings. |
| 150 mm | Meets thermal insulation requirements for multi-apartment residential buildings. A quality solution for energy-efficient houses intended for permanent residence. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). |
The thicker the polystyrene layer, the better the thermal insulation. We will help you select the optimal thickness for your building.
Installation and storage recommendations
Installation:
- Surface preparation: before installation the facade must be clean, dry, and even. Remove all irregularities and defects if necessary.
- Marking: carefully mark the panel placement starting from the bottom row.
- Fixing: panels are fixed to the wall using special facade dowels and polyurethane adhesive foam. Manufacturer recommendations regarding quantity and positioning of fixings must be followed.
- Joint grouting: after installation, joints between tiles must be filled with special grout to ensure additional sealing and aesthetic appearance.
Storage:
- Store thermal panels in a dry and ventilated area protected from direct sunlight and moisture.
- Panels must be stored horizontally on a flat surface to prevent deformation.
Do you want a beautiful and warm facade?
We will select the optimal thickness, color, and configuration for your building, prepare a 3D preview, and provide an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31