|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Primeberg Mattone Pietra Grafit Facade Thermal Panel
A stylish solution for facade finishing and insulation.
The material consists of clinker tiles from the Polish tile manufacturer Paradyz and EPS-100 insulation, combining the aesthetics of natural stone with effective thermal insulation.
The Grafit color represents a modern range of grey and graphite shades with natural transitions and a characteristic stone pattern. The surface is matte and smooth, slightly rough to the touch, giving the facade a restrained yet expressive character.
Application: the thermal panel is suitable for cladding facades, plinths, fences, as well as modern commercial buildings. It perfectly combines with white plaster, wood, or metal elements, creating stylish architecture with an emphasis on durability and premium appearance.
Suitable for the following types of buildings
- Private houses and cottages — elegant appearance and insulation.
- Country and suburban houses — comfort throughout the year.
- Multi-apartment buildings — reduction of heating costs and modern appearance.
- Commercial facilities (shops, offices, restaurants) — attractive facade and savings on utility expenses.
- Industrial buildings — effective insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decorative finishing in one material.
- Heat retention in winter and coolness in summer.
Technical characteristics
| Parameter | Value |
|---|---|
| Tile color | Grey / Graphite |
| Texture | Matte, Smooth |
| Tile type | Clinker gres |
| Tile manufacturer | Paradyz |
| Panel size (W × L) | 1040 × 560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| Polystyrene class | EPS-100 (Density — 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | From 5 to 15 kg depending on thickness |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs |
Polystyrene thickness — which one to choose?
Not sure which thickness to choose? Below is a short recommendation depending on the building type and climate conditions. If you are unsure, we will help you select the optimal option for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Used mainly as a corrective or decorative solution rather than full insulation. |
| 80 mm | Initial level of thermal insulation for relatively warm walls or regions with mild climate. Used in Europe for renovations but does not meet modern energy efficiency requirements for new buildings. |
| 100 mm | Basic solution for small buildings, cottages, or seasonal houses. Provides noticeable reduction of heat loss. |
| 120 mm | The most balanced solution for most residential houses in moderate and cold climates. Ensures indoor comfort and real heating cost savings. |
| 150 mm | Meets thermal insulation requirements for multi-apartment residential buildings. A quality solution for energy-efficient houses intended for permanent residence. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). |
The thicker the polystyrene layer, the better the thermal insulation. We will help you select the optimal thickness for your building.
Installation and storage recommendations
Installation:
- Surface preparation: before installation the facade must be clean, dry, and even. Remove all irregularities and defects if necessary.
- Marking: carefully mark the panel placement starting from the bottom row.
- Fixing: panels are fixed to the wall using special facade dowels and polyurethane adhesive foam. Manufacturer recommendations regarding quantity and positioning of fixings must be followed.
- Joint grouting: after installation, joints between tiles must be filled with special grout to ensure additional sealing and aesthetic appearance.
Storage:
- Store thermal panels in a dry and ventilated area protected from direct sunlight and moisture.
- Panels must be stored horizontally on a flat surface to prevent deformation.
Do you want a beautiful and warm facade?
We will select the optimal thickness, color, and configuration for your building, prepare a 3D preview, and provide an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31