|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
Facade Thermal Panel Primeberg Retro Brick Curry
Retro Brick Curry — a warm and expressive facade.
The thermal panel combines EPS-100 insulation and Cerrad clinker tile in the Curry shade. This is a combination of soft terracotta and warm brown tones. Such a palette adds coziness and a sunny appearance to the building.
Perfectly harmonizes with dark grey roofs, wooden inserts, and stone details.
Suitable types of buildings
- Private houses and cottages — elegant appearance and insulation.
- Summer houses and country homes — comfort throughout the year.
- Multi-apartment buildings — reduction of heating costs and a modern appearance.
- Commercial facilities (shops, offices, restaurants) — attractive facade and savings on utility expenses.
- Industrial buildings — effective insulation and aesthetics.
Why choose Primeberg thermal panels?
- Modern production with quality control.
- 20-year warranty.
- Easy and fast installation.
- Insulation and decoration combined in one material.
- Heat retention in winter and cool indoor climate in summer.
Technical specifications
| Parameter | Value |
|---|---|
| Tile color | Terracotta / Brown |
| Texture | Matte |
| Tile type | Clinker gres tile |
| Tile manufacturer | Cerrad |
| Panel size (W × L) | 1040 × 560 mm |
| Thermal conductivity (λ) | 0.037 W/m·K |
| Polystyrene class | EPS-100 (Density — 18 kg/m³) |
| Water absorption | 2–4% |
| Weight | from 5 to 15 kg (depending on thickness) |
| Area of one panel | 0.582 m² |
| Quantity per 1 m² | 2 pcs. |
Polystyrene thickness: which one to choose?
Not sure which thickness to choose? Below is a short guideline depending on the type of building and climate conditions. If you are unsure, we will help you select the optimal solution specifically for your project.
| Thickness | Recommendation |
|---|---|
| 50 mm | Minimal additional insulation for already insulated buildings or facades where increasing thickness is not possible. Provides a small effect and is used mainly as a corrective or decorative solution rather than full insulation. |
| 80 mm | Initial level of thermal insulation for relatively warm walls or regions with a mild climate. Used in Europe for renovations but does not meet modern energy efficiency requirements for new residential construction. |
| 100 mm | Basic option for small buildings, summer houses, or homes with seasonal residence. Provides noticeable reduction of heat loss, but in colder European regions it is already considered the minimum acceptable level. |
| 120 mm | The most balanced solution for most residential houses in moderate and cold climates. Provides a comfortable indoor microclimate and real heating cost savings without excessive material consumption. |
| 150 mm | Complies with Ukrainian building standards for thermal insulation of multi-apartment residential buildings. A high-quality solution for energy-efficient homes with permanent residence. Allows significant reduction of heating costs and approaching low-energy or passive house standards. |
| 200 mm | Maximum insulation level for northern regions or buildings with nearly zero energy consumption (NZEB). Used where minimal heat loss is a priority and complies with European thermal insulation standards for residential buildings. |
The thicker the polystyrene layer, the better the thermal insulation. We will help you choose the optimal thickness for your house.
Installation and storage recommendations
Installation:
- Surface preparation: Before installation, the facade must be clean, dry, and level. If necessary, eliminate all irregularities and defects.
- Marking: Carefully mark the placement of panels starting from the bottom row.
- Fixing: Panels are fixed to the wall using special dowels and polyurethane adhesive foam. It is important to follow the manufacturer's recommendations regarding the number and placement of fixings.
- Joint grouting: After installation, the joints between tiles must be filled with a special grout to ensure additional sealing and an aesthetic appearance.
Storage:
- Store thermal panels in a dry and ventilated space protected from direct sunlight and moisture.
- Panels must be stored horizontally on a flat surface to prevent deformation.
Do you want a beautiful and warm facade?
We will select the thickness, color, and configuration for your house, prepare a 3D preview, and provide an accurate calculation.
Leave a request on the website or call: +380 (66) 373 13 31